Overview
Pvc Pet Pp Plastic Sheet Making Machine
(1) The temperature of each section on the barrel of the plastic sheet production equipment increases gradually from the charging section to the temperature at the connection between the barrel and the molding mold.
(2) The temperature of the molding die is slightly higher than the temperature of the barrel. Higher out of the temperature control in 5 - 10 ℃. The temperature at both ends of the mold is slightly higher than the temperature in the mold, and the higher out temperature is controlled at 5 - 10℃.
(3) into the form of a piece, three-roller middle roller on the roller surface should be in a horizontal plane with the mold lip under the plane; lip end face and the center line of the middle roller parallel to the distance of 50 ~ 100mm.
(4) mold lip gap should be slightly less than or equal to the thickness of the plate products, mold lip middle gap should be slightly less than the two sides of the end of the mold lip gap.
Product Description
 | 1. Technical parameters: 1. Barrel material rod: Φ100mm Aspect ratio: 32:1 Material: 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume 2. Hanger type mould Material: 38CrMoAl, after quenching and tempering treatment, has good toughness and hardness, high temperature and frequent use without deformation 3. The extruder reducer adopts airtightness, good reliability and strength hard tooth surface reducer 4. Intelligent temperature control system 5. Applicable substrates: roll paper, non-woven fabric, chemical fiber cloth, etc. 6. Coating material: PE, PP, LDPE, LLDPE, HDPE, EVA, EMA and other resins |
7. Lamination width: 600mm~2800mm; 8. Coating thickness: 0.015mm~0.030mm 9. Coating uniformity: error ±5%; 10. Peel strength: 3~5N/30mm (according to the actual coating substrate) 11. The maximum extrusion capacity of the laminating machine: 200kg/h; 12. Mechanical line speed of laminating machine: 0~150m/min; 13. Double station unwinding, magnetic powder tension unwinding 14. Film thickness gauge, automatic measurement 15. Total installed capacity: about 150kw; 16. The total weight of the laminating machine unit: about 18 tons The above parameters of the composite laminating machine are for reference and can be customized. After-sales service: The main parts are guaranteed for one year, and free door-to-door installation and debugging |  |
Application Field
Spcification
| Model | SMST004 |
| Item number | According to the contract number |
| Product alias | PP PLA PS sheet machine |
| Product use | PP sheet can be used in stationery, food and drug gift packaging, lighting lampshades, electronic packaging boxes, etc. |
| Type | Sheet Extruder |
| Number of screws | Single screw |
| Screw diameter | 130 (mm) / can be customized |
| Maximum extrusion diameter | 1600 (mm) / can be customized |
| Production capacity | 100-180 (Kg/h) |
| Positioning accuracy | 0.2-2 (mm) |
| Dimensions | 17000*3000*2800 (mm) |
| Motor power | 156 (kw) |
| After-sales service | The main parts are guaranteed for one year, and free door-to-door installation and debugging |
Overview
Pvc Pet Pp Plastic Sheet Making Machine
(1) The temperature of each section on the barrel of the plastic sheet production equipment increases gradually from the charging section to the temperature at the connection between the barrel and the molding mold.
(2) The temperature of the molding die is slightly higher than the temperature of the barrel. Higher out of the temperature control in 5 - 10 ℃. The temperature at both ends of the mold is slightly higher than the temperature in the mold, and the higher out temperature is controlled at 5 - 10℃.
(3) into the form of a piece, three-roller middle roller on the roller surface should be in a horizontal plane with the mold lip under the plane; lip end face and the center line of the middle roller parallel to the distance of 50 ~ 100mm.
(4) mold lip gap should be slightly less than or equal to the thickness of the plate products, mold lip middle gap should be slightly less than the two sides of the end of the mold lip gap.
Product Description
| 1. Technical parameters: 1. Barrel material rod: Φ100mm Aspect ratio: 32:1 Material: 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume 2. Hanger type mould Material: 38CrMoAl, after quenching and tempering treatment, has good toughness and hardness, high temperature and frequent use without deformation 3. The extruder reducer adopts airtightness, good reliability and strength hard tooth surface reducer 4. Intelligent temperature control system 5. Applicable substrates: roll paper, non-woven fabric, chemical fiber cloth, etc. 6. Coating material: PE, PP, LDPE, LLDPE, HDPE, EVA, EMA and other resins |
7. Lamination width: 600mm~2800mm; 8. Coating thickness: 0.015mm~0.030mm 9. Coating uniformity: error ±5%; 10. Peel strength: 3~5N/30mm (according to the actual coating substrate) 11. The maximum extrusion capacity of the laminating machine: 200kg/h; 12. Mechanical line speed of laminating machine: 0~150m/min; 13. Double station unwinding, magnetic powder tension unwinding 14. Film thickness gauge, automatic measurement 15. Total installed capacity: about 150kw; 16. The total weight of the laminating machine unit: about 18 tons The above parameters of the composite laminating machine are for reference and can be customized. After-sales service: The main parts are guaranteed for one year, and free door-to-door installation and debugging | |
Application Field
Spcification
| Model | SMST004 |
| Item number | According to the contract number |
| Product alias | PP PLA PS sheet machine |
| Product use | PP sheet can be used in stationery, food and drug gift packaging, lighting lampshades, electronic packaging boxes, etc. |
| Type | Sheet Extruder |
| Number of screws | Single screw |
| Screw diameter | 130 (mm) / can be customized |
| Maximum extrusion diameter | 1600 (mm) / can be customized |
| Production capacity | 100-180 (Kg/h) |
| Positioning accuracy | 0.2-2 (mm) |
| Dimensions | 17000*3000*2800 (mm) |
| Motor power | 156 (kw) |
| After-sales service | The main parts are guaranteed for one year, and free door-to-door installation and debugging |
