-
Thermoplastic elastomers (TPEs) are typically elastic materials with a low modulus of elasticity that can be repeatedly stretched to more than twice their original length at room temperature and have the ability to recover almost completely to their original length after stress relief. An early mate
-
The molten resin extruded from the die is moulded into a substrate by a casting machine. This step is very important in the entire production process because the quality of the product is based on it. In the casting process, the molten resin is rapidly cooled and cured on quenching rollers, ideally
-
From the appearance of the film paper and the same specifications coated with silicone plastic release paper is no difference; and coated with silicone release film and ordinary film is not easy to distinguish with the naked eye, but you only need to resort to a few simple tools and operations, it w
-
Scope of application(1) Medical and health care cloths: surgical gowns, protective gowns, disinfectant wraps, masks, nappies, women's sanitary napkins, etc;(2) Home decoration cloth: wallpaper, tablecloth, bed sheet, bedspread, etc;(3) Clothing fabrics: lining, bonded lining, wadding, shaping cotton
-
Long-term film production needs to be carried out in advance of the necessary maintenance and maintenance of equipment.For cast film unit maintenance is introduced as follows.I. Multi-layer co-extrusion cast film extrusion technology is a traditional film extrusion production process. The biggest ad