Overview
Mono-layer Flow Casting Film Plastic Ps Foam Sheet Extrusion Production Line Board Making Machinery
Fourthly, in order to reduce costs and master the market, enterprises producing degradable sheets have purchased granulation production lines and used "twin-screw granulation production lines" to supply their own "degradable sheet" production lines.
In our opinion, the production technology of "degradable granules" has matured in the market, and the price has been reduced to a very low level, so the enterprises producing "degradable sheets" do not need to start their own granulation production lines, because there are already many granulation production lines with insufficient tasks, or even idle equipment.
In addition, some sheet machine manufacturing enterprises are developing "twin-screw extrusion degradation sheet production line", the purpose is to eliminate the "granulation" of this intermediate procedure, directly with the allocation of good powder production of sheet, in order to further reduce production costs. And this "twin-screw extrusion sheet production line" can also be processed with high-filled calcium-plastic degradation sheet as well as extrusion of PVC, PVDC and other sheet materials.
Product Description
 | 1. Technical parameters: 1. Barrel material rod: Φ100mm Aspect ratio: 32:1 Material: 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume 2. Hanger type mould Material: 38CrMoAl, after quenching and tempering treatment, has good toughness and hardness, high temperature and frequent use without deformation 3. The extruder reducer adopts airtightness, good reliability and strength hard tooth surface reducer 4. Intelligent temperature control system 5. Applicable substrates: roll paper, non-woven fabric, chemical fiber cloth, etc. 6. Coating material: PE, PP, LDPE, LLDPE, HDPE, EVA, EMA and other resins |
7. Lamination width: 600mm~2800mm; 8. Coating thickness: 0.015mm~0.030mm 9. Coating uniformity: error ±5%; 10. Peel strength: 3~5N/30mm (according to the actual coating substrate) 11. The maximum extrusion capacity of the laminating machine: 200kg/h; 12. Mechanical line speed of laminating machine: 0~150m/min; 13. Double station unwinding, magnetic powder tension unwinding 14. Film thickness gauge, automatic measurement 15. Total installed capacity: about 150kw; 16. The total weight of the laminating machine unit: about 18 tons The above parameters of the composite laminating machine are for reference and can be customized. After-sales service: The main parts are guaranteed for one year, and free door-to-door installation and debugging |  |
Application Field
Spcification
| Model | SMST004 |
| Item number | According to the contract number |
| Product alias | PP PLA PS sheet machine |
| Product use | PP sheet can be used in stationery, food and drug gift packaging, lighting lampshades, electronic packaging boxes, etc. |
| Type | Sheet Extruder |
| Number of screws | Single screw |
| Screw diameter | 130 (mm) / can be customized |
| Maximum extrusion diameter | 1600 (mm) / can be customized |
| Production capacity | 100-180 (Kg/h) |
| Positioning accuracy | 0.2-2 (mm) |
| Dimensions | 17000*3000*2800 (mm) |
| Motor power | 156 (kw) |
| After-sales service | The main parts are guaranteed for one year, and free door-to-door installation and debugging |
Overview
Mono-layer Flow Casting Film Plastic Ps Foam Sheet Extrusion Production Line Board Making Machinery
Fourthly, in order to reduce costs and master the market, enterprises producing degradable sheets have purchased granulation production lines and used "twin-screw granulation production lines" to supply their own "degradable sheet" production lines.
In our opinion, the production technology of "degradable granules" has matured in the market, and the price has been reduced to a very low level, so the enterprises producing "degradable sheets" do not need to start their own granulation production lines, because there are already many granulation production lines with insufficient tasks, or even idle equipment.
In addition, some sheet machine manufacturing enterprises are developing "twin-screw extrusion degradation sheet production line", the purpose is to eliminate the "granulation" of this intermediate procedure, directly with the allocation of good powder production of sheet, in order to further reduce production costs. And this "twin-screw extrusion sheet production line" can also be processed with high-filled calcium-plastic degradation sheet as well as extrusion of PVC, PVDC and other sheet materials.
Product Description
| 1. Technical parameters: 1. Barrel material rod: Φ100mm Aspect ratio: 32:1 Material: 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume 2. Hanger type mould Material: 38CrMoAl, after quenching and tempering treatment, has good toughness and hardness, high temperature and frequent use without deformation 3. The extruder reducer adopts airtightness, good reliability and strength hard tooth surface reducer 4. Intelligent temperature control system 5. Applicable substrates: roll paper, non-woven fabric, chemical fiber cloth, etc. 6. Coating material: PE, PP, LDPE, LLDPE, HDPE, EVA, EMA and other resins |
7. Lamination width: 600mm~2800mm; 8. Coating thickness: 0.015mm~0.030mm 9. Coating uniformity: error ±5%; 10. Peel strength: 3~5N/30mm (according to the actual coating substrate) 11. The maximum extrusion capacity of the laminating machine: 200kg/h; 12. Mechanical line speed of laminating machine: 0~150m/min; 13. Double station unwinding, magnetic powder tension unwinding 14. Film thickness gauge, automatic measurement 15. Total installed capacity: about 150kw; 16. The total weight of the laminating machine unit: about 18 tons The above parameters of the composite laminating machine are for reference and can be customized. After-sales service: The main parts are guaranteed for one year, and free door-to-door installation and debugging | |
Application Field
Spcification
| Model | SMST004 |
| Item number | According to the contract number |
| Product alias | PP PLA PS sheet machine |
| Product use | PP sheet can be used in stationery, food and drug gift packaging, lighting lampshades, electronic packaging boxes, etc. |
| Type | Sheet Extruder |
| Number of screws | Single screw |
| Screw diameter | 130 (mm) / can be customized |
| Maximum extrusion diameter | 1600 (mm) / can be customized |
| Production capacity | 100-180 (Kg/h) |
| Positioning accuracy | 0.2-2 (mm) |
| Dimensions | 17000*3000*2800 (mm) |
| Motor power | 156 (kw) |
| After-sales service | The main parts are guaranteed for one year, and free door-to-door installation and debugging |
