PP sheet production line application areas

PE sheet production lines and PP sheet production lines are mainly used to produce PE and PP sheets of different specifications. PE and PP sheets are a highly crystalline, non-polar thermoplastic resin with a white appearance in its original state and a degree of translucency in thin sections. The PE and PP sheets produced by the PE sheet production line and PP sheet production line have extremely good properties.

The PE and PP sheets produced by the PE sheet production line and PP sheet production line designed and produced by Nanjing Sumino Seiko are characterised by high toughness, tensile strength, corrosion resistance, low temperature resistance and good wear resistance.

They are widely used in chemical, garment, packaging and food industries. LDPE (high pressure low density polyethylene) is softer, with lower mechanical strength and lower melting point, and is suitable for making films and cable insulation. It is suitable for the manufacture of hollow products, injection moulded products, etc. It is widely used in the manufacture of hockey rink wall panels. Thickness: 1-350mm, colours: primary, white, blue, grey, black, green, etc.

HDPE sheets and rods are produced using imported equipment and unique internal stress technology, and are made of brand new PE raw materials without any recycled materials. After years of unremitting innovation and improvement, the cut bottom has eliminated the problems of sheet deformation, bubbles and easy fracture.

Thickness(H) x Height(H) : 0.2mm - 3mm x 1200mm, other specifications available on request.

Thickness(H) x Length(L) x Width(W) : 2mm - 350mm x 6000mm x 2000mm, other specifications available on request.

Size specification: Bar

Diameter (Ф) x Length (L): 15mm - 350mm x 1000mm, other sizes available on request.

Dimensions: Tubes

Diameter (Ф) x Length (L): 20mm - 350mm x 1000mm Other sizes available on request


Application areas

PE and PP sheets can be used for medical appliance parts, seals, cutting plates, sliding profiles. Widely used in chemical, machinery, chemical, electric power, garment, packaging, food and other industries. It is widely used in gas conveying, water supply, sewage, agricultural irrigation, mining, fine particle solids conveying, as well as oil fields, chemical industry and post and telecommunications, etc., especially in gas conveying.

PE insulation board is made of polyethylene plastic grain foam, with very sound-absorbing isolated single, water and gas resistance and cut-off gas circulation capacity, low water absorption, low thermal conductivity.

Rubber sponge insulation material is the use of excellent performance of rubber, polyethylene as the main raw material, with a variety of auxiliary materials, with a special process of foaming made of soft insulation energy-saving materials.

This product has soft, flexural winding, cold resistance, heat resistance, flame retardant, waterproof, low thermal conductivity, shock absorption, sound absorption and other excellent performance. It can be widely used in air conditioning, construction, chemical, pharmaceutical, light textile and other industries.

Drinking water sewage pipes, hot water pipes, transport containers, pump and valve parts, medical appliance parts, seals, cutting plates, sliding profiles. Widely used in chemical, machinery, electric power, clothing

The following picture shows the PP and PE sheet production line designed and produced by Nanjing Sumino Precision Industry for customers