Overview
Mono-layer Flow Casting Film Plastic Ps Foam Sheet Extrusion Production Line Board Making Machinery
Fifth, K - resin blending transparent KPS sheet instead of PP transparent sheet manufacturing disposable containers, instead of BOPS, PVS production sheet trend.
As BOPS, PVC sheet need special equipment production, so the general thermoforming enterprises need BOPS, PVC sheet is mostly purchased. Coupled with the PVC trimmings enterprises can not be utilized by themselves, the recycling price is very low, increasing the production cost of enterprises. Another reason is that PVC recycling material is easy to contaminate other plastics, so in the production of extra attention, which brings some trouble to the production operation.KPS sheet can be processed in the general extrusion sheet production line, the edge of the enterprise can be utilized by their own, but also can increase their own production of sheet, reducing the cost of production. So some enterprises have begun to use KPS sheet to make transparent drinking cups with good hardness and toughness, and some use KPS to make lids instead of PVC sheet.
KPS sheet is a blend of K-resin and GPPS resin. The possibility of it replacing PP sheet, PVC sheet and BOPS sheet will be further increased. Domestic equipment producing PP sheet can also produce more satisfactory KPS sheet.
Product Description
 | 1. Technical parameters: 1. Barrel material rod: Φ100mm Aspect ratio: 32:1 Material: 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume 2. Hanger type mould Material: 38CrMoAl, after quenching and tempering treatment, has good toughness and hardness, high temperature and frequent use without deformation 3. The extruder reducer adopts airtightness, good reliability and strength hard tooth surface reducer 4. Intelligent temperature control system 5. Applicable substrates: roll paper, non-woven fabric, chemical fiber cloth, etc. 6. Coating material: PE, PP, LDPE, LLDPE, HDPE, EVA, EMA and other resins |
7. Lamination width: 600mm~2800mm; 8. Coating thickness: 0.015mm~0.030mm 9. Coating uniformity: error ±5%; 10. Peel strength: 3~5N/30mm (according to the actual coating substrate) 11. The maximum extrusion capacity of the laminating machine: 200kg/h; 12. Mechanical line speed of laminating machine: 0~150m/min; 13. Double station unwinding, magnetic powder tension unwinding 14. Film thickness gauge, automatic measurement 15. Total installed capacity: about 150kw; 16. The total weight of the laminating machine unit: about 18 tons The above parameters of the composite laminating machine are for reference and can be customized. After-sales service: The main parts are guaranteed for one year, and free door-to-door installation and debugging |  |
Application Field
Spcification
| Model | SMST004 |
| Item number | According to the contract number |
| Product alias | PP PLA PS sheet machine |
| Product use | PP sheet can be used in stationery, food and drug gift packaging, lighting lampshades, electronic packaging boxes, etc. |
| Type | Sheet Extruder |
| Number of screws | Single screw |
| Screw diameter | 130 (mm) / can be customized |
| Maximum extrusion diameter | 1600 (mm) / can be customized |
| Production capacity | 100-180 (Kg/h) |
| Positioning accuracy | 0.2-2 (mm) |
| Dimensions | 17000*3000*2800 (mm) |
| Motor power | 156 (kw) |
| After-sales service | The main parts are guaranteed for one year, and free door-to-door installation and debugging |
Overview
Mono-layer Flow Casting Film Plastic Ps Foam Sheet Extrusion Production Line Board Making Machinery
Fifth, K - resin blending transparent KPS sheet instead of PP transparent sheet manufacturing disposable containers, instead of BOPS, PVS production sheet trend.
As BOPS, PVC sheet need special equipment production, so the general thermoforming enterprises need BOPS, PVC sheet is mostly purchased. Coupled with the PVC trimmings enterprises can not be utilized by themselves, the recycling price is very low, increasing the production cost of enterprises. Another reason is that PVC recycling material is easy to contaminate other plastics, so in the production of extra attention, which brings some trouble to the production operation.KPS sheet can be processed in the general extrusion sheet production line, the edge of the enterprise can be utilized by their own, but also can increase their own production of sheet, reducing the cost of production. So some enterprises have begun to use KPS sheet to make transparent drinking cups with good hardness and toughness, and some use KPS to make lids instead of PVC sheet.
KPS sheet is a blend of K-resin and GPPS resin. The possibility of it replacing PP sheet, PVC sheet and BOPS sheet will be further increased. Domestic equipment producing PP sheet can also produce more satisfactory KPS sheet.
Product Description
| 1. Technical parameters: 1. Barrel material rod: Φ100mm Aspect ratio: 32:1 Material: 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume 2. Hanger type mould Material: 38CrMoAl, after quenching and tempering treatment, has good toughness and hardness, high temperature and frequent use without deformation 3. The extruder reducer adopts airtightness, good reliability and strength hard tooth surface reducer 4. Intelligent temperature control system 5. Applicable substrates: roll paper, non-woven fabric, chemical fiber cloth, etc. 6. Coating material: PE, PP, LDPE, LLDPE, HDPE, EVA, EMA and other resins |
7. Lamination width: 600mm~2800mm; 8. Coating thickness: 0.015mm~0.030mm 9. Coating uniformity: error ±5%; 10. Peel strength: 3~5N/30mm (according to the actual coating substrate) 11. The maximum extrusion capacity of the laminating machine: 200kg/h; 12. Mechanical line speed of laminating machine: 0~150m/min; 13. Double station unwinding, magnetic powder tension unwinding 14. Film thickness gauge, automatic measurement 15. Total installed capacity: about 150kw; 16. The total weight of the laminating machine unit: about 18 tons The above parameters of the composite laminating machine are for reference and can be customized. After-sales service: The main parts are guaranteed for one year, and free door-to-door installation and debugging | |
Application Field
Spcification
| Model | SMST004 |
| Item number | According to the contract number |
| Product alias | PP PLA PS sheet machine |
| Product use | PP sheet can be used in stationery, food and drug gift packaging, lighting lampshades, electronic packaging boxes, etc. |
| Type | Sheet Extruder |
| Number of screws | Single screw |
| Screw diameter | 130 (mm) / can be customized |
| Maximum extrusion diameter | 1600 (mm) / can be customized |
| Production capacity | 100-180 (Kg/h) |
| Positioning accuracy | 0.2-2 (mm) |
| Dimensions | 17000*3000*2800 (mm) |
| Motor power | 156 (kw) |
| After-sales service | The main parts are guaranteed for one year, and free door-to-door installation and debugging |
