| Quantity: | |
|---|---|
Overview
The sheet machine unit consists of the following parts: main machine part, calendering part, conveying part, traction part, cutting part or coiling part, and electrical control part. Reasonable structure and convenient operation, advanced control, small volume, high output. High degree of pneumatic and automatic. The main machine adopts the mesh belt pressure material, the pressure material body adopts the pneumatic form for starting and lowering, and the mesh belt adopts the pneumatic form for loosening and tightening. The mesh belt and material trough are made of stainless steel, and all rollers are firstly ground and then chromium-plated. The winding part is driven by torque motor, the winding speed can be adjusted at any time, automatic winding, pneumatic clamping saves labor and time. Yarn cutting part adopts speed motor to achieve stepless speed change, so that the range of yarn content increases, reliable and accurate adjustment. Yarn cutting knife roller adopts spiral form, which reduces noise and improves the service life of rubber roller and blade. The electrical control part adopts center control to meet the production demand, and all the electrical components adopt famous brand products for precise and reliable control.
Product Description
 | 1. Technical parameters: 1. Barrel material rod: Φ100mm Aspect ratio: 32:1 Material: 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume 2. Hanger type mould Material: 38CrMoAl, after quenching and tempering treatment, has good toughness and hardness, high temperature and frequent use without deformation 3. The extruder reducer adopts airtightness, good reliability and strength hard tooth surface reducer 4. Intelligent temperature control system 5. Applicable substrates: roll paper, non-woven fabric, chemical fiber cloth, etc. 6. Coating material: PE, PP, LDPE, LLDPE, HDPE, EVA, EMA and other resins |
7. Lamination width: 600mm~2800mm; 8. Coating thickness: 0.015mm~0.030mm 9. Coating uniformity: error ±5%; 10. Peel strength: 3~5N/30mm (according to the actual coating substrate) 11. The maximum extrusion capacity of the laminating machine: 200kg/h; 12. Mechanical line speed of laminating machine: 0~150m/min; 13. Double station unwinding, magnetic powder tension unwinding 14. Film thickness gauge, automatic measurement 15. Total installed capacity: about 150kw; 16. The total weight of the laminating machine unit: about 18 tons The above parameters of the composite laminating machine are for reference and can be customized. After-sales service: The main parts are guaranteed for one year, and free door-to-door installation and debugging |  |
Application Field
Spcification
| Model | SMST004 |
| Item number | According to the contract number |
| Product alias | PP PLA PS sheet machine |
| Product use | PP sheet can be used in stationery, food and drug gift packaging, lighting lampshades, electronic packaging boxes, etc. |
| Type | Sheet Extruder |
| Number of screws | Single screw |
| Screw diameter | 130 (mm) / can be customized |
| Maximum extrusion diameter | 1600 (mm) / can be customized |
| Production capacity | 100-180 (Kg/h) |
| Positioning accuracy | 0.2-2 (mm) |
| Dimensions | 17000*3000*2800 (mm) |
| Motor power | 156 (kw) |
| After-sales service | The main parts are guaranteed for one year, and free door-to-door installation and debugging |
Overview
The sheet machine unit consists of the following parts: main machine part, calendering part, conveying part, traction part, cutting part or coiling part, and electrical control part. Reasonable structure and convenient operation, advanced control, small volume, high output. High degree of pneumatic and automatic. The main machine adopts the mesh belt pressure material, the pressure material body adopts the pneumatic form for starting and lowering, and the mesh belt adopts the pneumatic form for loosening and tightening. The mesh belt and material trough are made of stainless steel, and all rollers are firstly ground and then chromium-plated. The winding part is driven by torque motor, the winding speed can be adjusted at any time, automatic winding, pneumatic clamping saves labor and time. Yarn cutting part adopts speed motor to achieve stepless speed change, so that the range of yarn content increases, reliable and accurate adjustment. Yarn cutting knife roller adopts spiral form, which reduces noise and improves the service life of rubber roller and blade. The electrical control part adopts center control to meet the production demand, and all the electrical components adopt famous brand products for precise and reliable control.
Product Description
| 1. Technical parameters: 1. Barrel material rod: Φ100mm Aspect ratio: 32:1 Material: 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume 2. Hanger type mould Material: 38CrMoAl, after quenching and tempering treatment, has good toughness and hardness, high temperature and frequent use without deformation 3. The extruder reducer adopts airtightness, good reliability and strength hard tooth surface reducer 4. Intelligent temperature control system 5. Applicable substrates: roll paper, non-woven fabric, chemical fiber cloth, etc. 6. Coating material: PE, PP, LDPE, LLDPE, HDPE, EVA, EMA and other resins |
7. Lamination width: 600mm~2800mm; 8. Coating thickness: 0.015mm~0.030mm 9. Coating uniformity: error ±5%; 10. Peel strength: 3~5N/30mm (according to the actual coating substrate) 11. The maximum extrusion capacity of the laminating machine: 200kg/h; 12. Mechanical line speed of laminating machine: 0~150m/min; 13. Double station unwinding, magnetic powder tension unwinding 14. Film thickness gauge, automatic measurement 15. Total installed capacity: about 150kw; 16. The total weight of the laminating machine unit: about 18 tons The above parameters of the composite laminating machine are for reference and can be customized. After-sales service: The main parts are guaranteed for one year, and free door-to-door installation and debugging | |
Application Field
Spcification
| Model | SMST004 |
| Item number | According to the contract number |
| Product alias | PP PLA PS sheet machine |
| Product use | PP sheet can be used in stationery, food and drug gift packaging, lighting lampshades, electronic packaging boxes, etc. |
| Type | Sheet Extruder |
| Number of screws | Single screw |
| Screw diameter | 130 (mm) / can be customized |
| Maximum extrusion diameter | 1600 (mm) / can be customized |
| Production capacity | 100-180 (Kg/h) |
| Positioning accuracy | 0.2-2 (mm) |
| Dimensions | 17000*3000*2800 (mm) |
| Motor power | 156 (kw) |
| After-sales service | The main parts are guaranteed for one year, and free door-to-door installation and debugging |
