Overview
Extrusion casting: Plastic particles are plasticized by the screw and then extruded by the flat die head into a linear extrusion, stretched and attached to the surface of paper, film, non-woven fabrics, woven fabrics and other flexible substrates, and then cooled and shaped to form a composite material with the barrier and heat sealing properties of the plastic film layer, and the strong toughness and functional properties of the substrate.
Product Description
 | 1. Technical parameters: 1. Barrel material rod: Φ100mm Aspect ratio: 32:1 Material: 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume 2. Hanger type mould Material: 38CrMoAl, after quenching and tempering treatment, has good toughness and hardness, high temperature and frequent use without deformation 3. The extruder reducer adopts airtightness, good reliability and strength hard tooth surface reducer 4. Intelligent temperature control system 5. Applicable substrates: roll paper, non-woven fabric, chemical fiber cloth, etc. 6. Coating material: PE, PP, LDPE, LLDPE, HDPE, EVA, EMA and other resins |
7. Lamination width: 600mm~2800mm; 8. Coating thickness: 0.015mm~0.030mm 9. Coating uniformity: error ±5%; 10. Peel strength: 3~5N/30mm (according to the actual coating substrate) 11. The maximum extrusion capacity of the laminating machine: 200kg/h; 12. Mechanical line speed of laminating machine: 0~150m/min; 13. Double station unwinding, magnetic powder tension unwinding 14. Film thickness gauge, automatic measurement 15. Total installed capacity: about 150kw; 16. The total weight of the laminating machine unit: about 18 tons The above parameters of the composite laminating machine are for reference and can be customized. After-sales service: The main parts are guaranteed for one year, and free door-to-door installation and debugging |  |
Application Field
Spcification
| Barrel material rod | Φ100mm |
| Aspect ratio | 32:1 |
| Material | 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume |
| Material | 520m/min |
| Longitudinal stretch ratio | 1:1 - 1:8 |
| Horizontal stretch ratio | 1:7 - 1:10 |
| Annual output | 55000T/Y |
| The above width and thickness can be customized | |
| After-sales service | The main parts are guaranteed for one year, and free door-to-door installation and debugging |
Overview
Extrusion casting: Plastic particles are plasticized by the screw and then extruded by the flat die head into a linear extrusion, stretched and attached to the surface of paper, film, non-woven fabrics, woven fabrics and other flexible substrates, and then cooled and shaped to form a composite material with the barrier and heat sealing properties of the plastic film layer, and the strong toughness and functional properties of the substrate.
Product Description
| 1. Technical parameters: 1. Barrel material rod: Φ100mm Aspect ratio: 32:1 Material: 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume 2. Hanger type mould Material: 38CrMoAl, after quenching and tempering treatment, has good toughness and hardness, high temperature and frequent use without deformation 3. The extruder reducer adopts airtightness, good reliability and strength hard tooth surface reducer 4. Intelligent temperature control system 5. Applicable substrates: roll paper, non-woven fabric, chemical fiber cloth, etc. 6. Coating material: PE, PP, LDPE, LLDPE, HDPE, EVA, EMA and other resins |
7. Lamination width: 600mm~2800mm; 8. Coating thickness: 0.015mm~0.030mm 9. Coating uniformity: error ±5%; 10. Peel strength: 3~5N/30mm (according to the actual coating substrate) 11. The maximum extrusion capacity of the laminating machine: 200kg/h; 12. Mechanical line speed of laminating machine: 0~150m/min; 13. Double station unwinding, magnetic powder tension unwinding 14. Film thickness gauge, automatic measurement 15. Total installed capacity: about 150kw; 16. The total weight of the laminating machine unit: about 18 tons The above parameters of the composite laminating machine are for reference and can be customized. After-sales service: The main parts are guaranteed for one year, and free door-to-door installation and debugging | |
Application Field
Spcification
| Barrel material rod | Φ100mm |
| Aspect ratio | 32:1 |
| Material | 38CrMoAl, Quenching and tempering, surface nitriding, with exclusive mixing section, good mixing effect and large discharge volume |
| Material | 520m/min |
| Longitudinal stretch ratio | 1:1 - 1:8 |
| Horizontal stretch ratio | 1:7 - 1:10 |
| Annual output | 55000T/Y |
| The above width and thickness can be customized | |
| After-sales service | The main parts are guaranteed for one year, and free door-to-door installation and debugging |
